Bst900w Manual Better «90% HOT»

The input voltage is higher than or equal to the set output voltage, or the output is turned off.

Check with a multimeter that your power source provides at least 8V DC at the terminal blocks, and double-check that IN+ and IN- are wired correctly. The module shuts down or resets under heavy loads bst900w manual

: Setting the system to AUTO-ON programs the module to immediately push power to the output terminals as soon as it receives input power. The input voltage is higher than or equal

: Illuminates when the load draws maximum allowed current, shifting the module into current-limiting mode. Control Buttons bst900w manual

Press the button once. The voltage display value will flash.