“The DAP‑1360, all hardware revisions, have reached their End of Life (“EOL”) / End of Service Life (“EOS”) Life‑Cycle on (or 08/20/2020). D‑Link US recommends D‑Link devices that have reached EOL/EOS to be retired and replaced.”
Follow these steps to update your DAP‑1360 to firmware 6.10 (or any other version): Dap-1360 Firmware 6.10 Download
| Problem | Possible Solution | | :--- | :--- | | | Ensure you have extracted the ZIP file and are using the correct file for your hardware revision. Try a different browser – users have reported success with Internet Explorer 11, Firefox, or Opera. | | Firmware from 6.10 fails to upgrade to 6.12 | There are known reports where upgrading from 6.10 to 6.12 (or 6.11) fails with the message “unable to complete upgrading”. One user solved it by using the recovery console. Default recovery IP is 192.168.0.50 . | | Cross‑regional firmware issues | Do not install firmware intended for a different region (e.g., NA firmware on an International device), as this can cause radio frequency mismatches and unstable operation. | | Browser compatibility | Chrome may not always work correctly. Try Internet Explorer 11 or Firefox as alternatives. | | Device does not respond after update | Perform a factory reset by holding the WPS/RESET button for 10 seconds while the device is powered on, then release. After the reset, you may need to set a static IP on your computer (e.g., 192.168.0.2 ) to access the web interface again. | | | Firmware from 6
