Jcm Gen 5 Manual ((install)) <TRUSTED | EDITION>

Check for any debris or "confetti" left over from ticket edges. Use compressed air to blow out dust from the internal gears. 4. JCM GEN 5 Error Codes & Troubleshooting

Features a two-color LED bezel that enhances user experience and alerts. jcm gen 5 manual

Insert a clean ticket stack into the tray with the and positioned towards the front-facing sensor. Check for any debris or "confetti" left over

Open the printer, remove the jammed paper, and reset the printer. JCM GEN 5 Error Codes & Troubleshooting Features

Connect a standard USB communications cable or RS-232 serial cable to the printer’s communication interface.

| Switch | Function | OFF (Default) | ON | | :--- | :--- | :--- | :--- | | 1 | Protocol | Pulse (Old) | | | 2 | Baud Rate | 9600 | 19200 | | 3 | Parity | None | Even | | 4 | Power Saving | Disabled | Enabled (Motor stops after 15s) | | 5 | Inhibit Logic | High to Inhibit | Low to Inhibit | | 6 | Reserved | OFF | Do Not Use | | 7 | Stacker Type | Standard Drop | Side Drop (G5-SD only) | | 8 | Self-Test | OFF | ON (Enables diagnostic mode) |

The JCM GEN 5 is frequently updated to recognize new currency security features. To update: Connect the unit to a PC via USB. Use the software.